• The Devireg™ 130 is a floor sensing, surface mounted thermostat used for direct control of Floor Heating Systems. This thermostat is designed to be mounted on a wall, generally within the area to be heated, but as it does not sense air temperature it may be mounted in a cupboard or vanity if preferred.

• The Devireg™ 131 is an air sensing, surface mounted thermostat used for direct control of Room Heating Systems (other than floor heating or where no sensor probe can be installed).  As it senses air temperature only, this thermostat must be mounted in an area free from draughts and direct sunlight, on the wall within the area to be heated. It is normally installed 1.5 m above floor level.

• The Devireg™ 132 is a combination floor and air sensing, surface mounted thermostat used for direct control of Floor or Ceiling Heating Systems. It is recommended for use with timber floors as it regulates both the floor and air temperatures. This ensures optimum comfort whilst protecting your wooden floor. As it senses both floor/ceiling and air temperature, this thermostat must be mounted in an area free from draughts and direct sunlight, on the wall within the area to be heated. It is normally installed 1.5 m above floor level.

APPLICATIONS: 
Designed to control heating systems in houses, offices, hotels, public buildings etc. 

FEATURES:

PDF - Devireg™ 130 / 131 / 132 Installation & Use Guides